TSG Resolute Mark

Case Studies

nav close icon
Search
Show me studies on
arrow-dropdown
.
3MConvertingElectronics

TSG Resolute was contacted by a start-up, e-commerce company in search of different sizes of foam gasket frames, with 3M adhesive on one side, to be used around the perimeter of small dry-erase boards. The gasket frames needed to be soft to the touch, but they did not need to allow compression set for aesthetic…

LightingPlastic Extrusion

TSG Resolute was asked by a lighting manufacture to help them create a light fixture lens for an LED light Fixture. The customer wanted to hide the individual LED pixels of light in the fixture. Because of the close proximity of the LED’s to the lens, the solution was two-fold. First, we met with a…

3MLighting

A client from the lighting industry contacted TSG Resolute requesting a material that would adhere their LED board to their lighting fixture. Additionally, they requested a material that would also act as a thermal gap pad to dissipate heat in the fixture. The material needed to be as thin as possible, carry a VO rating,…

3MAppliance

A customer in the appliance industry contacted TSG Resolute requesting that the recommendation of a superior material to Nomex Aramid Fiber to act as a Flame Barrier for the timer shield. It had to be 94-5VA and pass the rigid hot wire ignition test in the appliance industry. The Aramid Fiber being used was failing…

3MLighting

A customer from the Lighting Industry reached out to TSG Resolute for help with a unique raw material that required very sensitive handling to eliminate tearing, fingerprints, and any contamination of the raw material. The customer was having quality and delivery issues that were causing delays in 3 high volume production parts. They asked TSG…

LightingPlastic Extrusion

A client from the commercial and residential lighting industry contacted our company regarding noise complaints owing to a fluorescent lighting fixture.  When these fixtures were turned on, the bulbs emitted a series of popping or snapping sounds that were very distracting in office environments. The client contacted TSG, Inc. because of our superior ability to…

Automotive

A client from the automotive industry contacted TSG, Inc. requesting a lamination material that was non-adhesive, impact resistant, and flexible for compound radiuses.  The lamination also had to be Class A surface approved and fit into our client’s constrained budget.  The client was having difficulty finding a lamination material that would fit all of these…

Converting

When a client initially contacted TSG, Inc. seeking various quotes per print using several different raw material suppliers, we quickly discovered that our customer was having serious difficulties with their original die cut adhesive gaskets.  The gaskets they were using suffered many adhesive failures, and caused manufacturing bottlenecks that affected their bottom line.  The client…

3MLighting

While working in the lighting industry on location with a customer, an engineer posed a question about how to create a better light reflector in an architectural lighting fixture. The issue was that the fixture used a molded polycarbonate lens and there were 16 per unit. This was expensive and would not make it to…